Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

Subject: How to choose the two way valve?

How to choose the two way valve?

Postdate:2014-05-21 16:02:25   Hits:4060

How to choose the two way valve?


When you choose the two way solenoid valve, there are four principles for your reference:


1. First and most import one is "applicability"

    *The medium in the system should be applicable for the valve's requirement.

    *The medium in the system should be lower than the valve's requirement.

    *The operation fluid viscosity should be loewr than 20CST, if you need larger than 20CST, should be marked on the valve.

    *The medium should be clean, if not, should plus a filter in the valve.

    *Notify the size and the orifice, choose the same size as  your requirement.

    *Notify the voltage,  voltage in this -+10% is no problem.

2. The second  is "credibility"

    *There are two type two way solenoid valves, Normal Open and Normal Close. Choose the right one you need.

    *Choose the valve which have done biometry.

3.  The third is "security"

    *If high causticity liquid, should choose the SS304 or SS316 or SS316L body;

    *If high exploder fluid, should choose the anti-explosion models.

4. The forth is "economic"

    *After these three principles, choose the mose exonomic models.


That is all my suggestion.




  • 2/2 DIRECT OPERRATING VALVE SS304.... 1/4" - 1200 list, 3/8" - 1900 list, 1/2" - 2000 list, 3/4" - 2400 list, 1" - 3000 list, 1 1/4" - 7200 list, 1 1/2" - 7200 list, 2" - 10000 list,

    Read more
  • ACTUATOR WITH 3 PC SS316 BALL VALVE.... 1/2" - 4200 LIST, 3/4" - 6400 LIST, 1" - 7400 LIST, 1 1/4" - 10000 LIST, 1 1/2 " - 11200 LIST, 2" - 15000 LIST,

    Read more